Wagon classification starting with "NCN"
NCNX 23148
Details: wagon "NCNX 23148 V" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | STEEL COIL |
| Remarks: | EX NCNY 23148C;NCNX 23148V;EX RCNX 23148 |
| BSG Code: | NXKZ |
|
| 14.09.1994 | Reclassified from wagon "NCNX 23148 V" to " wagon "NCNY 23148 C".
(Jump to NCNY 23148)
|
| 01.11.1994 | Repair "VEHICLE RECLASSIFY". |
| 01.11.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 23148 C" |
| 28.07.1995 | Repair "VEHICLE RECLASSIFY". |
| 28.07.1995 | Issued at location "Australian National" with a previous code of wagon "RCNX 23148 C" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 23148 C" |
NCNX 31662
| 11.07.1988 | Reclassified from wagon "NCNX 31662 L" to " wagon "NCEX 31662 H".
(Jump to NCEX 31662)
|
NCNX 31663
| 28.03.1991 | Repair "HANDRAILS END". |
| 15.07.1991 | Repair "AIR BRAKE SYSTEM COMPLETE". |
| 27.09.1994 | Reclassified from wagon "NCNX 31663 U" to " wagon "RCNX 31663 B".
(Jump to RCNX 31663)
|
NCNX 31664
Details: wagon "NCNX 31664 G" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | GENERAL |
| Remarks: | EX NCNX 31664 G; EX RCNX 31664 K |
| BSG Code: | NXKZ |
|
| 29.09.1989 | Repair "COUPLER SUPPORT PLATE AND LINER". |
| 12.04.1990 | Repair "END BRAKE COCK". |
| 12.04.1990 | Repair "END HOSE". |
| 12.04.1990 | Repair "END HOSE". |
| 12.04.1990 | Repair "HANDRAILS". |
| 03.06.1995 | Repair "VEHICLE RECLASSIFY". |
| 03.06.1995 | Issued at location "Australian National" with a previous code of wagon "RCNX 31664 K" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31664 K" |
NCNX 31665
| 10.08.1988 | Reclassified from wagon "NCNX 31665 P" to " wagon "NCEX 31665 L".
(Jump to NCEX 31665)
|
NCNX 31666
| 29.08.1993 | Repair "HANDRAILS". |
| 24.11.1994 | Reclassified from wagon "NCNX 31666 B" to " wagon "RCNX 31666 F".
(Jump to RCNX 31666)
|
NCNX 31667
| 22.07.1989 | Repair "COUPLER SUPPORT PLATE AND LINER". |
| 30.07.1990 | Repair "STEP". |
| 30.09.1994 | Reclassified from wagon "NCNX 31667 K" to " wagon "RCNX 31667 Y".
(Jump to RCNX 31667)
|
NCNX 31668
| 24.01.1995 | Reclassified from wagon "NCNX 31668 T" to " wagon "RCNX 31668 A".
(Jump to RCNX 31668)
|
NCNX 31669
Details: wagon "NCNX 31669 F" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | STEEL ONLY |
| Remarks: | EX NCNX 31669 F; EX RCNX 31669 J |
| BSG Code: | NXKZ |
|
| 02.07.1990 | Repair "HAND BRAKE ASSEMBLY COMPLETE". |
| 28.07.1990 | Repair "BRAKE BLOCK RB95". |
| 19.10.1994 | Repair "VEHICLE RECLASSIFY". |
| 19.10.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31669 J" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31669 J" |
NCNX 31670
Details: wagon "NCNX 31670 B" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | GENERAL |
| Remarks: | EX RCNX 31670 F |
| BSG Code: | NXKZ |
|
| 21.09.1994 | Repair "VEHICLE RECLASSIFY". |
| 21.09.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31670 F" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31670 F" |
NCNX 31671
| 19.10.1994 | Reclassified from wagon "NCNX 31671 K" to " wagon "RCNX 31671 Y".
(Jump to RCNX 31671)
|
NCNX 31672
| 27.09.1994 | Reclassified from wagon "NCNX 31672 T" to " wagon "RCNX 31672 A".
(Jump to RCNX 31672)
|
NCNX 31674
| 13.09.1988 | Reclassified from wagon "NCNX 31674 Y" to " wagon "NCEX 31674 K".
(Jump to NCEX 31674)
|
NCNX 31675
| 15.01.1991 | Repair "HANDRAILS". |
| 29.03.1991 | Repair "COUPLER SUPPORT PLATE AND LINER". |
| 29.03.1991 | Repair "END HOSE". |
| 16.11.1992 | Repair "BRAKE LEVER". |
| 29.08.1993 | Repair "HANDRAILS". |
| 27.06.1995 | Reclassified from wagon "NCNX 31675 A" to " wagon "RCNX 31675 E".
(Jump to RCNX 31675)
|
NCNX 31676
Details: wagon "NCNX 31676 J" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | STEEL COIL |
| Remarks: | EX NCNX 31676 J; EX RCNX 31676 N |
| BSG Code: | NXKZ |
|
| 27.09.1994 | Repair "VEHICLE RECLASSIFY". |
| 27.09.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31676 N" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31676 N" |
NCNX 31677
| 18.11.1988 | Reclassified from wagon "NCNX 31677 S" to " wagon "NCEX 31677 Y".
(Jump to NCEX 31677)
|
NCNX 31678
Details: wagon "NCNX 31678 E" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | STEEL ONLY |
| Remarks: | EX NCNX 31678 E; EX RCNX 31678 X |
| BSG Code: | NXKZ |
|
| 22.10.1994 | Repair "VEHICLE RECLASSIFY". |
| 22.10.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31678 X" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31678 X" |
NCNX 31679
| 07.11.1988 | Reclassified from wagon "NCNX 31679 N" to " wagon "NCEX 31679 J".
(Jump to NCEX 31679)
|
NCNX 31680
| 12.09.1988 | Reclassified from wagon "NCNX 31680 J" to " wagon "NCEX 31680 F".
(Jump to NCEX 31680)
|
NCNX 31901
Details: wagon "NCNX 31901 V" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | GENERAL |
| Remarks: | EX NCNX 31901 V; EX RCNX 31901C |
| BSG Code: | NXKZ |
|
| 10.05.1995 | Repair "VEHICLE RECLASSIFY". |
| 10.05.1995 | Issued at location "Australian National" with a previous code of wagon "RCNX 31901 C" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31901 C" |
NCNX 31902
| 27.09.1994 | Reclassified from wagon "NCNX 31902 H" to " wagon "RCNX 31902 L".
(Jump to RCNX 31902)
|
NCNX 31903
| 11.07.1988 | Reclassified from wagon "NCNX 31903 Q" to " wagon "NCEX 31903 M".
(Jump to NCEX 31903)
|
NCNX 31904
| 12.09.1988 | Reclassified from wagon "NCNX 31904 C" to " wagon "NCEX 31904 V".
(Jump to NCEX 31904)
|
NCNX 31905
| 07.07.1988 | Reclassified from wagon "NCNX 31905 L" to " wagon "NCEX 31905 H".
(Jump to NCEX 31905)
|
NCNX 31906
| 27.09.1994 | Reclassified from wagon "NCNX 31906 U" to " wagon "RCNX 31906 B".
(Jump to RCNX 31906)
|
NCNX 31907
| 11.07.1988 | Reclassified from wagon "NCNX 31907 G" to " wagon "NCEX 31907 C".
(Jump to NCEX 31907)
|
NCNX 31908
| 29.03.1991 | Repair "HAND BRAKE ASSEMBLY COMPLETE". |
| 21.09.1994 | Reclassified from wagon "NCNX 31908 P" to " wagon "RCNX 31908 T".
(Jump to RCNX 31908)
|
NCNX 31909
Details: wagon "NCNX 31909 B" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1970 |
| Operating System: | SRA OF NSW |
| Intended Use: | STEEL COIL |
| Remarks: | EX NCEX 31909 B |
| BSG Code: | NXKI |
|
| 14.07.1989 | Repair "VEHICLE RECLASSIFY". |
| 14.07.1989 | Issued at location "Australian National" with a previous code of wagon "NCEX 31909 U" |
| 14.08.1989 | Repair "VEHICLE RECLASSIFY". |
| 14.08.1989 | Issued at location "Australian National" with a previous code of wagon "NCEX 31909 U" |
| 15.08.1989 | Repair "VEHICLE RECLASSIFY". |
| 15.08.1989 | Issued at location "Australian National" with a previous code of wagon "NCEX 31909 U" |
| 19.10.1989 | Repair "VEHICLE RECLASSIFY". |
| 19.10.1989 | Issued at location "Australian National" with a previous code of wagon "NCEX 31909 U" |
| 20.09.1993 | Repair "HANDRAILS END". |
NCNX 31910
| 03.05.1991 | Repair "AIR BRAKE SYSTEM COMPLETE". |
| 03.05.1991 | Repair "BOGIE COMPLETE". |
| 03.05.1991 | Repair "BRAKE PULL ROD". |
| 03.05.1991 | Repair "COUPLER COMPLETE". |
| 03.05.1991 | Repair "DRAFTGEAR COMPLETE HEAVY". |
| 03.05.1991 | Repair "YOKE COMPLETE". |
| 17.10.1994 | Reclassified from wagon "NCNX 31910 U" to " wagon "RCNX 31910 B".
(Jump to RCNX 31910)
|
NCNX 31911
Details: wagon "NCNX 31911 G" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | STEEL COIL |
| Remarks: | EX NCNX 31911 G; EX RCNX 31911K |
| BSG Code: | NXKZ |
|
| 04.10.1989 | Repair "END HOSE". |
| 04.07.1991 | Repair "COUPLER SUPPORT PLATE AND LINER". |
| 27.09.1994 | Repair "VEHICLE RECLASSIFY". |
| 27.09.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31911 K" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31911 K" |
NCNX 31912
Details: wagon "NCNX 31912 P" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | STEEL COIL |
| Remarks: | EX NCNX 31912 P; EX RCNX 31912T |
| BSG Code: | NXKZ |
|
| 04.05.1990 | Repair "AIR BRAKE SYSTEM COMPLETE". |
| 04.05.1990 | Repair "BOGIE COMPLETE". |
| 04.05.1990 | Repair "BRAKE PULL ROD". |
| 04.05.1990 | Repair "OTHER SLACK ADJUSTER COMPLETE". |
| 12.05.1994 | Repair "VEHICLE RECLASSIFY". |
| 12.05.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31912 T" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31912 T" |
NCNX 31913
Details: wagon "NCNX 31913 B" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | GENERAL |
| Remarks: | EX NCNX 31913 B; EX RCNX 31913 F |
| BSG Code: | NXKZ |
|
| 04.10.1993 | Repair "HANDRAILS". |
| 25.12.1994 | Repair "VEHICLE RECLASSIFY". |
| 25.12.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31913 F" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31913 F" |
NCNX 31914
| 18.12.1990 | Repair "END HOSE". |
| 30.09.1994 | Reclassified from wagon "NCNX 31914 K" to " wagon "RCNX 31914 Y".
(Jump to RCNX 31914)
|
NCNX 31915
| 24.11.1994 | Reclassified from wagon "NCNX 31915 T" to " wagon "RCNX 31915 A".
(Jump to RCNX 31915)
|
NCNX 31916
| 26.05.1992 | Repair "UNCOUPLING ROD ASSEMBLY". |
| 31.08.1994 | Reclassified from wagon "NCNX 31916 F" to " wagon "RCNX 31916 J".
(Jump to RCNX 31916)
|
NCNX 31917
Details: wagon "NCNX 31917 Y" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | STEEL BULK |
| Remarks: | EX NCNX 31917 Y; EX RCNX 31917S |
| BSG Code: | NXKZ |
|
| 08.01.1990 | Repair "COUPLER SUPPORT PLATE AND LINER". |
| 08.01.1990 | Repair "YOKE CARRIER". |
| 20.09.1994 | Repair "VEHICLE RECLASSIFY". |
| 20.09.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31917 S" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31917 S" |
NCNX 31918
| 11.07.1988 | Reclassified from wagon "NCNX 31918 A" to " wagon "NCEX 31918 T".
(Jump to NCEX 31918)
|
NCNX 31919
Details: wagon "NCNX 31919 J" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | GENERAL |
| Remarks: | EX NCNX 31919J; EX RCNX 31919N |
| BSG Code: | NXKZ |
|
| 21.07.1995 | Repair "VEHICLE RECLASSIFY". |
| 21.07.1995 | Issued at location "Australian National" with a previous code of wagon "RCNX 31919 N" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31919 N" |
NCNX 31920
| 27.06.1995 | Reclassified from wagon "NCNX 31920 F" to " wagon "RCNX 31920 J".
(Jump to RCNX 31920)
|
NCNX 31921
| 27.09.1994 | Reclassified from wagon "NCNX 31921 Y" to " wagon "RCNX 31921 S".
(Jump to RCNX 31921)
|
NCNX 31922
Details: wagon "NCNX 31922 A" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1987 |
| Operating System: | SRA OF NSW |
| Intended Use: | GENERAL |
| Remarks: | NCNX31922; EX RCNX 31922E |
| BSG Code: | NXKZ |
|
| 25.07.1994 | Repair "VEHICLE RECLASSIFY". |
| 25.07.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31922 E" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31922 E" |
NCNX 31923
| 22.04.1988 | Reclassified from wagon "NCNX 31923 J" to " wagon "NCEX 31923 F".
(Jump to NCEX 31923)
|
NCNX 31924
| 26.10.1988 | Reclassified from wagon "NCNX 31924 S" to " wagon "NCEX 31924 Y".
(Jump to NCEX 31924)
|
NCNX 31925
| 08.07.1988 | Reclassified from wagon "NCNX 31925 E" to " wagon "NCEX 31925 A".
(Jump to NCEX 31925)
|
NCNX 31926
| 10.08.1988 | Reclassified from wagon "NCNX 31926 N" to " wagon "NCEX 31926 J".
(Jump to NCEX 31926)
|
NCNX 31927
| 22.04.1988 | Reclassified from wagon "NCNX 31927 W" to " wagon "NCEX 31927 S".
(Jump to NCEX 31927)
|
NCNX 31928
Details: wagon "NCNX 31928 X" in AN "Mainland Division".
| Owner: | SRA OF NSW |
| Operator: | C |
| Length Over Headstocks: | 11m |
| Tare Weight: | 24tonne |
| Current Gauge: | Standard |
| Gauge Restrictions: | B+S |
| Bogie Configuration: | 2X2 |
| Date Built: | 01.01.1970 |
| Operating System: | SRA OF NSW |
| Intended Use: | STEEL COIL |
| Remarks: | EX NCNX 31928 X; EX RCNX 31928M |
| BSG Code: | NXKI |
|
| 14.09.1994 | Repair "VEHICLE RECLASSIFY". |
| 14.09.1994 | Issued at location "Australian National" with a previous code of wagon "RCNX 31928 M" |
| 16.08.1996 | Repair "VEHICLE RECLASSIFY". |
| 16.08.1996 | Issued at location "Australian National" with a previous code of wagon "RCNX 31928 M" |
NCNX 31929
| 14.07.1989 | Reclassified from wagon "NCNX 31929 R" to " wagon "NCEX 31929 N".
(Jump to NCEX 31929)
|
NCNX 31930
| 11.07.1988 | Reclassified from wagon "NCNX 31930 N" to " wagon "NCEX 31930 J".
(Jump to NCEX 31930)
|
NCNY 23148
| 14.09.1994 | Repair "VEHICLE RECLASSIFY". |
| 14.09.1994 | Issued at location "Australian National" with a previous code of wagon "NCNX 23148 V" |
Australian National - Traffic Information Management System (TIMS) - data dumped on 30
th May 1997
This page was last updated on Tuesday 16 Oct 2012 at 1:58pm - see the
readme file for additional information.